Fence Calculator
Enter the run length of your fence in feet or metres.
Please note that this calculation does not take into account any corners you have e.g.: If you are doing three sides of a garden, then you will need 3 calculations or remove a post for each adjoining corner.

Post supports to be used with

 

[SPIKES/METPOSTS] [BOLT DOWN] [CONCRETE-IN]
Length of fence ft or   metres 
Panels height  
Post Size Normal domestic fencing use 3" (75mm)
Calculations are based on 6ft (1.8m) wide panel 

  

Shopping List
Post Supports  
Metclips See our range of Metclips
Driving Tool See our range of Driving tools
Caps or Finials
See our range of our plastic Metcaps or Wooden caps.
Panels Please round up or down as needed
Posts Minimum height ft
(Longer posts required for sloping ground).
Other

Recommendations based on normal ground conditions. See below.

The key to erecting a fence on a sloping site is to 'stagger' the panels, which means you keep each panel horizontal, leaving a triangular shape which could be filled by a gravel board. Longer fence posts are required to compensate for the sloping ground where panels need to be stepped. 

Email us